SUPASCREEN® HINGED SECURITY DOORS
Lets the fresh air in
and that’s all
Amplimesh® hinged security screen doors offer the comfort of fresh air flowing through your home with clear and unobstructed outdoor views. Keep intruders out and your family safe with our range of durable stainless steel home security doors.
Security hinged doors offer the simple solution for a front door or smaller entrance way. Designed to suit your lifestyle and budget, our hinged screen doors have been trusted by over 2 million Australian customers.
Exceeding Australian Security Standards
WE DON’T JUST MEASURE UP
Learn more about security standards
Australian Standard AS5039-2008 & AS5041-2003 – Security Testing
SupaScreen® Stainless Steel and IntrudaGuard® Aluminium security products are subjected to a rigorous regime of impact tests, jemmy attacks and pull testing under this standard, to ensure that the inherent strength and structural integrity of the manufactured security product is maintained.
Australian Standard AS5039-2008 & AS5041-2003 – Knife Shear Test
SupaScreen® Stainless Steel and IntrudaGuard® Aluminium security products are tested for material hardness and tensile strength by subjecting the mesh to a standardised physical cutting attack, which draws a knife over the mesh a number of times.
Australian Standard AS1530.4-2005, Appendix B7 – Fire Attenuation Test
SupaScreen® Stainless Steel security products have been tested in general accordance with this standard and when exposed to incident radiant heat SupaScreen® achieves a 41% reduction in the radiant heat flux between the inside and outside of the product.
Australian Standard AS1530.8.1-2007 – Bushfire Test
SupaScreen® Stainless Steel Security products have been tested under this standard and satisfied the requirements for Bushfire Attack Level (BAL) 40.
Australian Standard AS1170.2-2011 – Cyclone Missile Impacts
In cyclonic regions glazed windows and doors may need to be protected from flying debris. SupaScreen® Stainless Steel security products have been tested to resist a 4kg, 100mm x 50mm timber travelling at 34m/s fired from an air canon. The screen is then shot an additional five times with 8mm steel ball bearings, shot into the screen at the same speed.
Australian Standard AS5041 – Performance Testing
The dynamic impact test was created to imitate an intruder attempting to kick, shoulder or otherwise force their way through the screen. The accepted and standardised test to replicate this is five 100 joule impacts (Energy).
Using high tensile 316 marine grade stainless steel, woven into a fine mesh, Amplimesh® SupaScreen® is a modern innovation in security technology. SupaScreen® security screen doors are assembled using a unique patented pressure process, eliminating the need for screws, rivets, pins or snap-ins to retain the mesh panel. This system also ensures no dissimilar metal surfaces come into contact with each other, avoiding the possibility of corrosion.
We’re so sure of the quality of SupaScreen® security doors and window screens that we cover them with a comprehensive 16 year warranty.
- Tested to Australian Standard AS5039-2008 for maximum impact and shear resistance
- Enjoy clear unobstructed 156 degree angle of view
- High tensile 316 marine grade stainless steel
- Unique patented pressure process
- WERS rated for UV resistance and energy efficiency
- Superior protection against flying and crawling insects and pests
- Corrosion resistant
- 16 year SupaScreen® warranty
- Available in a range of frame colours
- Includes standard hardware
- 3 point locking mechanism
Produced with only the highest quality materials and rigorously tested at our NATA approved facility Amplimesh® SupaScreen® security screens are designed to withstand even the most aggressive would-be intruder, and everything nature can throw at them to boot.
For over 50 years, Amplimesh® security screen doors and windows have been tested in some of Australia’s harshest climactic conditions including surpassing an 8000hrs acetic acid salt spray milestone, an equivalent of over 25 years of usage.
Amplimesh® security screens are assembled into high quality door and window frames using our Amplimesh® patented ‘pressure fit’ mesh retaining system technology. This system prevents the door frame material from coming into contact with the stainless steel or aluminium security screens, thereby resisting galvanic corrosion and increasing the overall lifespan of your security screen product.
The Amplimesh® ‘pressure fit’ system uses no glue and has no visible fixings, giving your door/window a designer look and feel. No screws or clamps penetrate through the face of the security screen mesh, keeping the face of your security screen uncompromised. A dual purpose PVC ‘wrap around’ pressure fit co-extrusion allows for mesh retention and provides the ultimate protection from dissimilar metals coming into contact.
The finishes that are applied to Amplimesh® products are of high quality and are extremely durable and weather resistant. Like all fixtures around the home some maintenance is required to preserve the original appearance of the product.
Surfaces should be kept clean by prompt removal of all dust, dirt, grime and any foreign matter using clean water and a small amount of mild detergent. Do not under any circumstances use any abrasive type cleaning agent (Ajax or similar) or cleaning material (such as steel wool) as it will damage the anodised surface. Thoroughly wash off any residue of detergent with clean water.
Deposited grime absorbs moisture and holds it against the powder coated surface, damaging the coating. Surfaces should be kept clean by prompt removal of all dust, dirt, grime and any foreign matter using a soft sponge with clean water and a small amount of mild detergent. Thoroughly wash off any residue of detergent with clean water to avoid deterioration of the coating which will occur as a result of soap deposition. Do not under any circumstances use any abrasive type cleaning agent (Ajax or similar). If small scratches occur, they can be buffed out using a good quality car polish. Care must be taken to ensure the coated surface is not removed.
Frequency of cleaning is largely dependent on the location of the building. In most circumstances cleaning may be carried out every 3–4 months. Amplimesh® products installed close to more severe conditions, such as marine or industrial environments, should be cleaned every 2–4 weeks.
We’re so sure of the quality of our SupaScreen® security screen doors that we’ve backed them by a comprehensive 16 year warranty. As with all commercial warranties, your Amplimesh® security screen door or window screen must be cared for with regular cleaning and maintenance. Giving your screen a little love and attention every few months will not only maintain your warranty but will keep your screen looking great and performing at maximum efficiency.
Compliment your building design and deliver and increased level of security to your project.
The Amplimesh® Detention System offers the proven strength of SupaScreen® high-tensile 316 marine grade stainless steel mesh with a patented full perimeter fastening system and the additional strength of individual mechanical fixings.
This combination provides outstanding performance when under the strain of high level repeated impacts while continuing to offer the benefits of maintaining outlook and minimising natural light reduction.
Widely used in remote housing, education, cyclonic and government projects for advanced safety, Amplimesh® SupaScreen® security screens are tested all around Australia in some of our most extreme climatic conditions as well as at our NATA approved facility.
Used in conjunction with our Detention perimeter fastening system, you can be assured that Amplimesh® security screens will stand as a vigilant guardian on your commercial facility.
MAKE IT YOURS
We don’t only measure and fit your door. Your local Amplimesh® certified expert can help you tailor the perfect security screen product for your home. A wide range of colour selections are available, and with the addition of pet doors, midrails and other accessories, your security screen will fit right in with the look and feel of your home.
Amplimesh® recommends Interpon® Powder Coatings to protect and decorate the range of security products.
Customise your screen door with a wide range of custom accessories. Our Amplimesh® trusted experts can tailor your door to your space and needs by providing a variety of options including extra secure locks, pet doors and custom framing options.
Your Amplimesh® certified dealer will help you customise a solution that’s perfect for your space.