Security Folding Doors SupaScreen®

SUPASCREEN® FOLDING SECURITY DOORS

doors-folding-supascreen
hero-icon-supascreen

Amplimesh® folding security screen doors provide maximum strength and durability without obstructing airflow or outdoor views. With flush stainless steel handles and the ability to open in or out, it is no coincidence that architects love and demand our range of SupaScreen® security folding doors.


Folding doors add a touch of accordian class to wider openings such as those leading to decks or patios. Once opened, they can be stacked side by side to maximise available room so you can get the most out of your entertaining areas.

Exceeding Australian Security Standards

WE DON’T JUST MEASURE UP

securityknifefirebushfirewindcyclonic

Learn more about security standards

ico-close

security

Australian Standard AS5039-2008 & AS5041-2003 – Security Testing

Amplimesh® products are subjected to a rigorous regime of impact tests, jemmy attacks and pull testing under this standard, to ensure that the inherent strength and structural integrity of the manufactured security product is maintained.

knife

Australian Standard AS5039-2008 & AS5041-2003 – Knife Shear Test

SupaScreen® Stainless Steel meshes are tested for material hardness and tensile strength by subjecting the mesh to a standardised physical cutting attack, which draws a knife over the mesh a number of times.

fire

Australian Standard AS1530.4-2005, Appendix B7 – Fire Attenuation Test

SupaScreen® Stainless Steel Security products have been tested in general accordance with this standard and when exposed to incident radiant heat SupaScreen® achieves a 41% reduction in the radiant heat flux between the inside and outside of the product.

bushfire

Australian Standard AS1530.8.1-2007 – Bushfire Test

SupaScreen® Stainless Steel Security products have been tested under this standard and satisfied the requirements for Bushfire Attack Level (BAL) 40.

wind

Australian Standard AS1170.2-2002, Clause 5.3.2 – Cyclonic Missile Impacts

In cyclonic regions windows and doors may need to be protected from flying debris, SupaScreen® Stainless Steel Security products have been tested to this standard, resisting the 4kg, 100mm x 50mm timber travelling at 15m/s.

cyclonic

Australian Standard AS1170.2-1989 – Cyclonic Missile Impacts

QLD Government, Design Guidelines for Aust. Public Cyclone Shelters, 2002. Department of Health, Western Australia Health Facility Guidelines for Engineering Services, 2006. SupaScreen® Stainless Steel Security products have also been tested to and satisfied the more onerous testing regime of this Standard. The same piece of timber is impacted into the screen at the faster speed of 20m/s followed by 8mm Steel balls at 30m/s followed by fatigue testing.

SUPASCREEN®
SECURITY MESH

Using high tensile 316 marine grade stainless steel, woven into a fine mesh, Amplimesh® SupaScreen® security folding doors are assembled using a unique patented pressure process, eliminating the need for screws, rivets, pins or snap-ins to retain the mesh panel. This system also ensures no dissimilar metal surfaces come into contact with each other, avoiding the possibility of corrosion.

We’re so sure of the quality of SupaScreen® security doors and window screens that we cover them with a 16 year security warranty.

icon-supascreen-infill
icon-316-steel
Amplimesh SupaScreen 16 year warranty

BENEFITS OF
SUPASCREEN®

  • Tested to Australian Standard AS5039-2008 for maximum impact and shear resistance
  • Enjoy clear unobstructed 156 degree angle of view
  • High tensile 316 marine grade stainless steel
  • Unique patented pressure process
  • WERS rated for UV resistance and energy efficiency
  • Superior protection against flying and crawling insects and pests
  • Corrosion resistant
  • 16 year warranty
  • Available in a range of frame colours
  • Includes standard hardware
  • 3 point locking mechanism

TECHNICAL
SPECIFICATIONS

Produced with only the highest quality materials and rigorously tested at our NATA approved facility Amplimesh® SupaScreen® security screens are designed to withstand even the most aggressive would-be intruder, and everything nature can throw at them to boot.

For over 50 years, Amplimesh® security screen doors and windows have been tested in some of Australia’s harshest climactic conditions including surpassing an 8000hrs acetic acid salt spray milestone, an equivalent of over 25 years of usage.

Amplimesh® security screens are assembled into high quality door and window frames using our Amplimesh® patented ‘pressure fit’ mesh retaining system technology. This system prevents the door frame material from coming into contact with the stainless steel or aluminium security screens, thereby resisting galvanic corrosion and increasing the overall lifespan of your security screen product.

The Amplimesh® ‘pressure fit’ system uses no glue and has no visible fixings, giving your security folding door a designer look and feel. No screws or clamps penetrate through the face of the security screen mesh, keeping the face of your security screen uncompromised. A dual purpose PVC ‘wrap around’ pressure fit co-extrusion allows for mesh retention and provides the ultimate protection from dissimilar metals coming into contact.

CARE AND
MAINTENANCE

The finishes that are applied to Amplimesh® products are of high quality and are extremely durable and weather resistant. Like all fixtures around the home some maintenance is required to preserve the original appearance of the product.

Anodised Aluminium

Surfaces should be kept clean by prompt removal of all dust, dirt, grime and any foreign matter using clean water and a small amount of mild detergent. Do not under any circumstances use any abrasive type cleaning agent (Ajax or similar) or cleaning material (such as steel wool) as it will damage the anodised surface. Thoroughly wash off any residue of detergent with clean water.

Powdercoated Aluminium

Deposited grime absorbs moisture and holds it against the powder coated surface, damaging the coating. Surfaces should be kept clean by prompt removal of all dust, dirt, grime and any foreign matter using a soft sponge with clean water and a small amount of mild detergent. Thoroughly wash off any residue of detergent with clean water to avoid deterioration of the coating which will occur as a result of soap deposition. Do not under any circumstances use any abrasive type cleaning agent (Ajax or similar). If small scratches occur, they can be buffed out using a good quality car polish. Care must be taken to ensure the coated surface is not removed.

Frequency

Frequency of cleaning is largely dependent on the location of the building. In most circumstances cleaning may be carried out every 3-4 months. Amplimesh® products installed close to more severe conditions, such as marine or industrial environments, should be cleaned every 2-4 weeks.

Hands in bucket of water

WARRANTY
INFORMATION

We’re so sure of the quality of our SupaScreen® security products that we’ve backed them by a comprehensive 16 year warranty. As with all commercial warranties, your Amplimesh® security screen product must be cared for with regular cleaning and maintenance. Giving your screen a little love and attention every few months will not only maintain your warrantly but will keep your screen looking great and performing at maximum efficiency.

COMMERCIAL
BUILDING

Compliment your building design and deliver and increased level of security to your project.

The Amplimesh® Detention System offers the proven strength of SupaScreen® high-tensile 316 marine grade stainless steel mesh with a patented full perimeter fastening system and the additional strength of individual mechanical fixings.

This combination provides outstanding performance when under the strain of high level repeated impacts while continuing to offer the benefits of maintaining outlook and minimising natural light reduction.

Widely used in remote housing, education, cyclonic and government projects for advanced safety, Amplimesh® SupaScreen® security screens are tested all around Australia in some of our most extreme climatic conditions as well as at our NATA approved facility.

Used in conjunction with our Detention perimeter fastening system, you can be assured that Amplimesh® security screens will stand as a vigilant guardian on your commercial facility.

The Amplimesh commercial Detention System utilises the proven strength of high-tensile 316 marine grade stainless steel mesh with a patented full perimeter fastening system and the additional strength of individual mechanical fixings.

MAKE IT YOURS

We don’t only measure and fit your door. Your local Amplimesh® certified expert can help you tailor the perfect security screen product for your home. A wide range of colour selections are available, and with the addition of pet doors, midrails and other accessories, your security screen will fit right in with the look and feel of your home.

Amplimesh® recommends Interpon® Powder Coatings to protect and decorate the range of security products.

DON’T FORGET
THE DETAILS

Customise your door with a wide range of custom accessories. Our Amplimesh® trusted experts can tailor your bifold door to your space and needs by providing a variety of options including extra secure locks, pet doors and custom framing options.

Folding door handle

MEASURED,
MANUFACTURED
& INSTALLED

icon-authorised-dealer

Your Amplimesh® certified dealer will help you customise a solution that’s perfect for your space.

Folding door panel lock

pta-img
Secure your home with Amplimesh and you could be going places
Confirm your Amplimesh SupaScreen or IntrudaGuard order before 31 August for your chance to WIN!
Learn more